Orion/Comet Pro
Troubleshooting
Flash Code Diagnostics
Flash Code Number shown on LCD Display -
with brief description of fault.
Example - Flash Code 6
Flash Code 1
Fault
Batteries not charged.
Fix
Charge batteries as soon as possible.
Flash Code 2
Fault
Battery Voltage too low
Fix
Charge batteries as soon as possible.
If problem persists
for a service.
Flash Code 3
Fault
Battery Voltage too High
Fix
Check battery charger isn't connected when attempting to turn scooter on.
If problem persists
Flash Code 4
Fault
Motor has been overloaded
Fix
Turn Scooter off and leave for a couple of minutes.
If the fault still persists,
Flash Code 5
Fault
Brake Failure.
Fix
Check the Freewheel lever is in drive.
If problem persists
Flash Code 6
Fault
No neutral position when switching scooter on.
Fix
Check you aren't holding the drive lever before/as you are turning to key switch to turn the scooter on (See photos below).
If the fault still persists,
Flash Code 7
Fault
Fault with Speed Potentiometer.
Flash Code 8
Fault
Motor Voltage error.
Flash Code 9
Fault
Internal error.
Flash Code 10
Fault
Freewheel mode error.
